Trending

Laser cutting to manufacture self-expansive support - Ni-Ti-N alloy

What is Nitinol alloy? Alloys Ni-Ti -NOEL contain 50% nickel and 50% titanium. Nickel and titanium are equally distributed and each is allocated half of the time. It is possible to adjust its temperature range by altering the composition. The tempera…

More>>

Metal Alloy High Temperature Resistance Molybdenum Boat Sandblasting Surface With Laser

Molybdenum boats are widely used in high-temperature furnaces. The molybdenum-boat material tray has high purity. Metal alloy High Temperature Resistance Molybdenum boat sandblasting surface with laser: Molybdenum boats have high purity and a lo…

More>>

America Plans to Release 180 Million Barrels of Oil Reserves will Affect the Price of 3d metal printing laser

The America is considering releasing a total of 180 million barrels of oil from the Strategic Petroleum Reserve (SPR) in the coming months in an effort to keep oil prices down.According to reports, this will be the third time the United States has us…

More>>

Germany Production Cuts Shutdowns Closures Panic buying will Affect the Price of 3d metal printing laser

It is reported that the price of imported energy in Germany was 129.5% higher than that in February 2021, the cost of domestically produced en…

More>>

French Epidemic Continues to Rebound will Affect the Price of 3d metal printing laser

Official French data shows that for three consecutive days, there were more than 140,000 new confirmed cases in a single day in France: 145,560 new cases on the 23rd, 148,635 new cases on the 24th, and 143,571 new cases on the 25th. The daily average…

More>>

Brazil's Central Bank Raises Benchmark Interest Rate will Affect the Price of 3d metal printing laser

Gasoline prices at gas stations in the second week of March rose 97.6 won from the previous week to 1,861.6 won per liter. Although the average price for a week did not exceed 1,900 won, the price in the second half of the week in Seoul exceeded 2,00…

More>>

Interest Rate Increase will Affect the Price of 3d metal printing laser

It is reported that the central bank decided to raise the interest rate to 20%. Among them, the interest rate hike is to ensure that the deposit rate is raised to the necessary level to compensate for the increased risk of devaluation and inflation,…

More>>

Metal Materials Price Continues to Rise will Affect the Price of 3d metal printing laser

Since the beginning of 2022, the price of ternary lithium battery metal materials has continued to rise, which will lead to a rise in battery prices of about 18%, which in turn will hurt the total profits of electric vehicle manufacturers. It is repo…

More>>

Related news

What metal can withstand higher temperatures than tungsten

What metal is more resistant to heat than tungsten? The melting point for tungsten, which is 3,422, is the highest of all metal elements on the periodic table (the boiling point being 5,930). No metal element is higher in melting point than the tun…

More>>

The graphite grey powder coating

The graphite grey powder coating The graphite grey powder coating has good chemical stability. Specially processed graphite grey powder coating has the characteristics of corrosion resistance, good thermal conductivity, and low permeability. It is wi…

More>>

TEA dodecylbenzenesulfonate CAS 27323-41-7

TEA dodecylbenzenesulfonate is a new type of sulfate anionic surfactant. It is easily soluble, dispersible, compatible with hard water, and has high electrolyte stabilty.Solid content: 40% About TEA dodecylbenzenesulfonate: TEA dodecylbenzenesul…

More>>

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity 3D Printing 304 Stainless Steel Powder

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%