The Next Profit Margin in The Alumina Industry-Red Mud

In the absence of new countries that could replace the decrease in aluminum demand caused by China’s economic slowdown, alumina is expected to be a profitable industry.
Only the complete utilization of red clay, also known as the global problem, can be expected to bring the banner of next profits.

The first thing you need to know about red mud

Alumina produces approximately 1.5 tons of red clay, which has a particle size of between 0.088 and 0.25 mm, an average specific gravity of 2.7-9.0, a bulk mass density of between 0.8 and 1.00, and a melting range of 1250-1250 degC. Below is a table that shows the composition of red clay:

The Bayer method is used to produce the majority of alumina in China. The Bayer Method is characterized with high levels of iron, aluminium and alkali.

Second, the typical alumina case in the utilization of red clay

1. Chinalco Shandong Branch. The data available shows that in 2016, the red mud utilization rate was 25 percent. China's enterprises that produce alumina have a high utilization rate, with accumulated consumption exceeding 12 million reds. Henan Aluminium Industry Transformation and Growth Action Plan (2018-2010) clearly states that the comprehensive usage rate of red clay will reach 10% by 2020. No harm will come if there is no comparison. China's comprehensive utilization rate is too low. Mountain aluminum red clay is used primarily for new coal-burning technology, high grade cement, highway subgrade and brick making.

2. Weiqiao Group, 2018: 20,000 tons of mud red were used to cover the 5.3 km roadbed in the Binzhou section Jiqing Expressway. According to estimates each kilometer of expressway could consume 200,000 tons red mud. Provincial highways could consume 60,000 tonnes red mud. Municipal roads could consume 20,000 tonnes red mud. Future market opportunities are wide for countries in China that have a lot of highway mileage.

Third, a typical example of the use of red clay by social forces

Shandong Satellite TV broadcasted a story on December 31st, 2018 about Zibo Tianzhirun Ecological Technology Co. Ltd. using large amounts of red dirt to produce permeable blocks (consumption 70,000 tons per year). The red-mud permeable bricks project was chosen as one of Shandong Province's top ten innovations for the circular economy in 2018 with a 90% blend rate. The boss invested 30 million in the project, after Zui. Only 2 houses were then studed.

This is not only reminiscent that enterprises in Inner Mongolia have spent hundreds of billions of dollars trying to crack the code on the production of alumina from fly ash and yet there hasn't been a breakthrough.

Fourth, comprehensive red mud usage recommendations

Red mud has been used for a longer time in the production and use of roadbeds. Each has its advantages and disadvantages. There is a nearby plant that produces cement, but the consumption of roadbeds is high. The future demand for permeable blocks is low in economically developed areas. Therefore, it's possible to promote the production of these bricks nationwide. The only disadvantage is the fact that it is more cost-effective to sell bricks within 800 kilometers.

China's red mud alumina is generally used at a very low rate. Our utilization rate may not be as low as that of other countries, but we cannot compare ourselves to foreign countries. China's alumina has entered a new era, one of self-transcendence. We are now maximizing the utilization of red clay. Profit margins are expected to reshape alumina's market position.

Tech Co., Ltd. is a chemical product manufacturer with more than 12 years' experience. Contact us if you need high-quality Aluminum Oxide. Sending an inquiry .

Inquiry us

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, electricity and electronics indus…

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Hafnium Powder is a metal made from hafnium. The most common method to prepare hafnium from sponge hafnium involves hydrogenation and deshydrogenation. Purity>99%Particle Size : 5-10 Micron Hafnium Nanopowder: Hafnium Hafnium on the periodic table :…

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3 Diameter: 1.0mm-150.0mm Surface: sintered or for…

0086-0379-64280201 brad@ihpa.net skype whatsapp