How Much Do You Know About Wear-resistant Alumina Ceramic Linings

What is wear-resistant alumina lining?The wear-resistant ceramic lining made from alumina is formed using Al2O3 (as the main raw material) and a rare metallic oxide as the solvent. This ceramic is then calcined in a high heat of 1700 degC.
There are many different types of wear-resistant alumina tiles, including high-aluminum sheets, wear-resistant ceramic patches, alumina linings.

What are some of the benefits and features of ceramic alumina linings that resist wear?
Wear-resistant Alumina Ceramic Lining Features: First, its hardness is high. Rockwell hardness reaches HRA80-90. Second, its wear resistance, wear resistance that can be up to ten times greater than high-chromium cast-iron and manganese-steel, can extend the life of the equipment. Third, it is light and its density of 3.65g/cm can reduce the weight of the equipment. Fourth, the wear resistant alumina lining adheres firmly and is heat It is a good performer, and can be used for a very long time in temperatures up to 350 degrees Celsius without aging.
Wear-resistant Alumina Ceramic Lining: It is an inorganic, non-metallic, material that will not pollute the atmosphere. It has excellent toughness, seismic performance, as well as strong fracture toughness. Wear-resistant ceramic lining has a high mechanical strength, good compatibility and integrity. It can effectively stop breakage and peeling due to impact force.

How can I identify wear resistant alumina ceramic linings?
Look at the surface of ceramic sheet first. The surface is uniformly colored, smooth, and free of black spots. After vulcanization the ceramic wear-resistant lining is attached to background paper. The joints will be continuously formed in a straight line. They can be identified through measuring the density. Density can be measured to calculate the alumina. The test can also be performed using a 45-degree spray angle, a 50-mm distance, and a pressure 4.0 kg/cm3. Gradient, time-measured wear within 60 minute.

Can wear-resistant ceramic alumina linings be applied in these industries?
Wear-resistant alumina Ceramic Linings can be applied in many industries, including power, metallurgy (such as coal, mineral powders, tailings and cement), chemical, machinery, and others. The material should be safe and reliable to use for high-temperature corrosion, high-temperature wear or high-temperature ablation. Data show that wear-resistant materials such as ceramics can last ten to twenty-fold longer than other materials like cast stone and steel.
Tech Co., Ltd. is a professional nanoparticles silver manufacturer with 12 years of experience in chemical research and product development. Contact us if you need high quality Aluminium oxide. Send a request .

Inquiry us

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, electricity and electronics indus…

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Hafnium Powder is a metal made from hafnium. The most common method to prepare hafnium from sponge hafnium involves hydrogenation and deshydrogenation. Purity>99%Particle Size : 5-10 Micron Hafnium Nanopowder: Hafnium Hafnium on the periodic table :…

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3 Diameter: 1.0mm-150.0mm Surface: sintered or for…

0086-0379-64280201 skype whatsapp