High Purity Telluride Copper CuTe Powder Cas 12019-23-7, 99.9%

Telluride (Cupper(II), Telluride) is a dark powder that is very stable when stored at room temperatures. Particle Size: -80mesh and -100mesh
Purity: 99.99%

Telluride Copper CoTe Powder -
Telluride copper also known as alloys C15400 and C15400 semi-shared tellurium (also called TECU), are copper-based alloys with varying amounts tellurium/phosphorus. The content of tellurium is typically between 0.4% and 0.7%, while the content of phosphorus ranges between 0.004 and 0.12 percent.

Copper tellurium can be described as an alloy made of copper tellurium. Copper tellurium containing 0.4-0.7% tellurium has good machinability. The master alloy is telluride copper, which contains half the amount of copper and half the percent of tellurium.

Tellurium Copper has the following properties: atmospheric corrosion resistance; high temperature and conductivity hydrogen embedment (i.e. caused by the introduction or diffusion of hydrogen fracturing, weaken), 65-130HV hardness, good formability, 85-90% of machinability rating (if no cutting brass is used for 100), suitable to weld and braze, but not suitable for any specific welding process such as resistance welding, oxide-acetylene arc welding, spot welding, and resistance welding.

It is a copper alloy with excellent machinability and high electrical and thermal conductivity. Copper tellurium alloy is known for having the best cutting performance. It is forged, cast and extruded, drawn and blanked, as well as molded. The tellurium copper alloy can be made into plate, sheets, rods, wire, tubes, and many other forms. It is ideal for industrial use due to its properties. If you are interested in Telluride Copper CuTe Powder, please send us an inquiry.

Telluride copper cuTe powder performance:

Copper telluride can be described as a chemical substance having the molecular structure CuTe. Copper telluride can be described as a dark powder. It is very stable in ambient air and at room temperatures. Copper telluride, an inorganic mineral that is important for storing copper and tellurium resources, can also be stored as a great way to do so. Cu is used to replace Te in H2SO4 solutions. Copper telluride can be produced by replacing Te. It separates tellurium form many metalions and gives rise to a very high concentration. Te can either be + 4 or 6 valences with Cu replacing it. This can all generate Cu 2 Te. Tellurium is in its valence form, which means that Cu does not affect Te's. Cu telluride, when exposed to an acid or base, can react chemically with these acids and bases. This is the key for seperating and recovering Cu and T. To put it simply, copper and tellurium combine at a higher temperature in order to separate the tellurium.

Telluride copper cuTe powder specification :

Room temperature stable at room temperature, black crystal powder. Copper telluride, an important organic material that stores large amounts of tellurium as well as copper resources, is also very useful.

Copper Telluride Certificate (ppm)
Purity Zn Ag Cu Al Mg Ni Pb Sn Se Si Cd Fe As
>99.99% <=5 <=4 <=5 <=3 <=5 <=5 <=5 <=5 <=6 <=4 <=8 <=8 <=5

You can order different products depending on your requirements.

How does Telluride Copper CopperCuTe Powder be made?
These steps are part of a preparation process for copper tellurium alloys:
1. Mixing high-purity copper with high purity tellurium according the required ratios, or after creating layers of high pure copper and high quality tellurium respectively, is completed. The graphitecrucible is then sealed, after which the protective gas in the graphitecrucible has been replaced by air.
2. The graphite crucible can be placed in a synth furnace. After it is closed, the oxygen from the furnace chamber is transferred into the protective gases.
3. To ensure that the furnace is at 1.04.5MPa, add protective gas. A furnace's temperature rises to a higher temperature than normal within 60-90min. The temperature then drops after 24h.
4. After the temperature has been lowered to below 100°C, the protective gas is removed from the furnace. This reduces the pressure to normal. Finally, the furnace can be opened for the production of copper tellurium alloy ingot.

Telluride Copper Copper CuTe Powder -
Tellurium copper alloy is used primarily for: High conductivity, high resistance to corrosion of precision electronic parts and electric components, advanced mechanical parts and electrical parts.
The tellurium copper alloy is available in a range of profile options, including sheet, plate, rod, wire and tube.
Indicators for contact material of charging piles were developed in the wake of the promotion and construction of new energy vehicles. Due to its high electrical qualities and ease of processing, copper tellurium can be successfully used as a high-current connector for new energy vehicle.


Packing & Shipping Telluride copper cuTe powder -
We offer many packing options that are dependent on Telluride copper cuTe powder quantities.
Telluride copper cuTe powder packaging: vacuum packaging, 100g to 500g or 1kg/bag 25kg/barrel and as per your request
Telluride copper cuTe powder shipping: could ship out by sea, air or express once payment receipt has been received.

Cuprous Telluride Powder Properties

Additional Names Telluroxopper and Copper monotelluride.
Copper (2+) telluride
12019-23-7
Compound Formula CuTe
Molecular Weight 191.15
Appearance Crystalline
Melting Point 1125 degC (607 degF)
Solubility In Water N/A
Density 7.1 g/cm3
Purity 99.00%
Particle Size -80mesh, -100mesh
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Weight 192.836
Monoisotopic 192.836

Cuprous Telluride Pulp Safety & Health Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

NEXT Telluride Powder

Our Latest Products

High Quality Calcium Dodecyl Stearate

Calcium dodecylstearate, a chemical substance that looks like a needle, is flaky. It is not soluble or soluble with water. However, it can be dissolved in alcohol, ether, and chloroform. It can be used in the production of grease as well as for organ…

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Tungsten carbide, a mixture of tungsten (and carbon), is an organic compound. The molecular formula of WC is 195.85.Particle Size: -325mesh Purity: 99% About Tungsten Carbide WC Powder: Tungsten carbide A mixture of tungsten, carbon, and other…

High Purity Tantalum Carbide TaC Powder Cas 12070-06-3, 99.9%

Tantalum carbid is a white metal-like cubic cubic crystalline product that falls under the category of sodium chloride. Tantalum carbide has been used in the past to stop cemented carbide-sintered grain growth.Particle Size: -325mes Tantalum-Carbid…

0086-0379-64280201 brad@ihpa.net skype whatsapp