What is the most common powder used for 3D Printing Metal? Flowability: A key characteristic for metal powder is the possibility of flowing through the 3D printer. Materials with higher flowability can be controlled with greater ease and create soli…
In this article, defoamer, anti-shrinkage agent, preservation agent, and inhibitor will be talked about.…
Koalas were declared endangered in eastern Australia on Friday, with more and more koalas dying from disease, habitat loss, and other threats. Earlier, the koala was considered a vulnerable species, and the Commonwealth Department of the Environment…
Nitinol Titanium is a powder that is made from a shape memory metal, which is an alloy with good plasticity. At a given temperature it can return to its original form. Purity:99.9%Particle size range: 15 to 53 microns Nitinol Nickel Titanium Ni Ti…
What is wear-resistant alumina lining?The wear-resistant ceramic lining made from alumina is formed using Al2O3 (as the main raw material) and a rare metallic oxide as the solvent. This ceramic is then calcined in a high heat of 1700 degC. There are…
Cementite can be described as a metal compound made of iron, carbon and has the chemical formula Fe3C. The hardness is high at HBW=800. Plasticity and toughness are nearly zero and the brittleness very large.Particle Size: 325mesh Purity: 99% Iron…