W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3 Diameter: 1.0mm-150.0mm Surface: sintered or for…
Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high thermal conductivity, and radiation absorption. It is used widely in the aerospace and medical industries. About Metal Alloy 18.5g/cm3 Polished Tungst…
The chemical compound with the formula of Cr2S3 inorganic chromium (III) sulfide. Chromium Sulfide has a water- and acid-soluble Chromium for use compatible with Sulfates. Particle size: 100mesh Purity: 99.99% Chromium Sulfide Properties…
PHES is an anionic sulfate surfactant. It is soluble easily in water and has good dispersibility.Solid Content >= 50 % About PHES Sodium 2 Propyl-1-heptanol Ether Sulfate PHES Sodium 2 Propyl-1-heptanol Ether Sulfate, a new anionic sulfate surfac…
CMEE Coconut Methyl Ester Ethoxylates are low foaming, easy to wash, dissolve quickly in coldwater, have no gel phase and good compatibility.Active matter content (%): 95 The following is a list of the most recent articles about CMEE Coconut Met…
This is a nonionic emulsifier, with a HLB of 5.2. The following is a list of the most recent articles about Glycerol monolaurate : Glycerol monolaurate, which is insoluble with water, has emulsifying properties and lubricating qualities. U…
FMEE is a fatty methyl esters ethoxylates. It offers excellent cleaning at low temperatures (below 60%).Active matter content (%): 98-98, 80-82 About FMEE (Fatty Methyl Ester Ethoxylates) : FMEE (Fatty Methyl Ester Ethoxylates) is a non-ionic lo…
Polyglycol Oleate, a nonionic surfactant, has low foam and is highly biodegradable. The following is a list of the most recent articles about Polyglycol Oleate : Polyoxyloleate is insoluble in strong acids and bases. The surfactant is high…
C12-13 Alkyl Sulfate Sodium Salt has excellent performance in decontamination, emulsification and foaming. It is also resistant to hard water.Solid Content: 69 % C12-13 alkyl sulfate sodium salt: C12-13 Alkyl Sulfate Sodium Salt has excellent per…
This is an amphoteric product. The product exhibits good interfacial properties and can lower the oil-water interface tension by as much as 10000ppm. Alkyl C16-18 Sulfobetaine is a sulfobetaine that contains hydroxypropyl C16-18. It can be used to…
Linear C10 Alcohol Ethoxylates has good foaming ability, is easily soluble, and does not gel in water.Active Value Content >=90 The Linear C10 Alcohol Ethoxylates The linear C10 alcohol estoxylates are easily soluble in aqueous solution, do not f…
Powder or granular solid dispersible in hot liquid, soluble with ethanol and hot oil. It is non-ionic with a HLB of 5.2. Glycerol Monolaurate - GML: Powder or granular solid dispersed in hot liquid, soluble with ethanol and hot fat. It is non-ioni…
First, concrete takes in and transfers warm more easily than dissipates heat easily. When a fire happens, it has the result of supporting burning, which amounts including fuel to the fire. The more it burns, the bigger it gets. Concrete may seem attr…
The powder boron is available in four variants. These are hexagonal boron, rhombohedral and cubic boron. The most common boron nitride produced is white graphite, which has a structure similar to graphite. The need to increase battery capacity, impro…
Lithium nitride, a metal nitrogen, has the chemical formula Li3N. This solid is purple or red and shows a light-green luster when lit by reflected light. Purity: 99.99%Particle Size: 100 mesh Lithium Nitride Li3N: Powder Description Li3N is a c…