High Quality Stearic Acid Amide Emulsion

Stearic Acid Amide Emulsion:
The white stearic acids amide emulsion is nontoxic, safe, effective, and not hazardous. The product can be easily dispersed in water, has low viscosity and is highly dispersible.
Stearamide may also be known as stearamide. Its chemical formula for stearamide is C17H35CONH2. Stearic acidamide is insoluble when mixed with water. It can be slightly soluble at room temperature in organic solvents. It is able to improve dispersion effects and the affinity of dyes.
Excellent adhesion and lubricity. No moisture absorption. You can mix it with paraffin wax. Ammonium salt is created by reacting stearic Acid and ammonia. It then gets dehydrated to get the final product. This salt has excellent lubricity as well as mold release capabilities. Use it as a pigment ink mixed agent, surface-active and fiber oil agent.
The use of stearamide in thermal paper coatings can serve as both a sensor and slip agent, and as an anti-blocking and slip agent for polyolefin films. The base of stearates is fatty saturated linear monocarboxylic oils derived from natural vegetable oil. Send an inquiry for the most current price to purchase bulk Stearic Acid Amide Emulsion.

Technical Information of Stearic Acid Amide Emulsion:

How does Stearic Acid Amide Emulsion get made?
Insoluble in water, stearic Acid amide must be prepared using emulsifiers. Even after adding dispersant, water-based stearic Acid amide emulsion is still not able to disperse well. Additionally, it can easily precipitate. Long-term storage may result in flocculation. Additionally, high-speed stirring is required and the grinding must be done under heat. The production costs are high.

First, add the water-based water-basedstearic al amide and emulsifiers C and B to warm water. Next stir for 30 minutes at 2500r/min. Finally add defoamer (stirring frequency is 2500r/min) and continue stirring for about 40 min. To obtain the aqueous water-basedstearical acid amide emulsion. This prepared water-based, stearic-acid amide-amide emulsion contains 41.7% solids. It has a viscosity level of 146mPa*S. After 30 minutes of centrifugation at 20000r/min, the water-based, stearic-acid amide-amide emulsion can be placed at 20-25C for 3 months. There was no flocculation or delamination.

Stearic Acid Amide Emulsion:
Stearamide can be used to lubricate and release molds for polyvinylchloride, polystyrene, and other plastics.
When used to block polyolefin film films from oleamide erucamide, stearamide will usually be combined.
Stearamide, unlike the common inorganic anti-blocking agents (silica), does not affect the transparency. Stearamide is used to release synthetic rubber, natural rubber, and as a lubricant for rubber compound processing. This gives it a high Gloss.
The sensitizer of thermal paper is made from stearic Acid amide Ultrafine Aqueous Dispersion.
The ultra-fine, water-based, stearic Acid amide dispersion serves as textile waterproofing, fibre softener, antistatic and wetting agents, and fixing aid.