CuO, copper oxide. Copper oxide is a black copper oxide with a slightly amphoteric, and slight hygroscopic chemical formula. The molecular mass relative to the element is 79.545. Its density is 6.96.9 g/cm3 and its melting point at 1026.
Purity: 99.5%
Pebble size: 40nm,200n
Cuprous Oxide CuO powder:
Copper oxide states : The oxidation state of Copper is +1 or +2.
Copper (II) Oxide is an organic substance with CuO. This black copper oxide is somewhat amphiphilic but slightly hygroscopic. Copper oxide has a weak base.
Black copperoxid is CuO. Red copperoxid Is Cu2O.
Copper oxide can be almost insoluble when mixed with water and alcohols. However, copper oxide disintegrates slowly in ammonia but fast in ammoniumcarbonate solution. The alkali-metal cyanides and strong acids dissolve the copper oxide.
Copper Oxide is used primarily to produce rayon, ceramics glaze and enamel and petroleum desulfurizes. Pesticides are also produced.
Cu oxide CuO are produced large-scale by pyrometallurgy. Pyrometallurgy is an important stage in the extraction of copper from ore. An aqueous mixture containing ammonia, ammonia, and oxygen is applied to the ore. This results in copper (I) and (II), amino complexes that are then extracted from the material. The steam is used to decompose these complexes and produce CuO.
The precursor to many copper-containing products like ceramics and wood preservers is cupric oxide. Cupric oxide is found in a variety of ways, including ingestion, skin contact and inhalation. Copper(II), oxide nanoparticles (NPCuO) are useful in the industrial sector as antimicrobial agent in textiles, paints, and catalysts for organic synthesis. You can also make them from electronic scraps. Because cupric oxide is toxic, muta and generates reactive oxygen compounds, it can cause potential health and environmental problems.
Copper oxide for sale:
To receive the newest copperoxide price, please send us an inquiry.
Performance Copper Oxide CuO Pulp:
Copper oxide is not soluble or soluble with water and alcohol. It can also be soluble in acids, ammonium chloride, potassium cyanide, and acid. The copper oxide can react with many bases and slowly dissolves in ammonia solutions. The main uses of copper oxide are to make rayon, ceramics glaze and enamel as well batteries, petroleum desulfurizes. Insecicides, hydrogen production catalysts, etc.
Technical Parameter Copper Oxide CuO powder:
Product
|
The Nuclear cdh857 CuO powder is 200mesh
|
Chemical Property (%)
|
Physical Property
|
CuO
|
So42
|
Fe
|
Cl
|
Ni
|
Pb
|
Loose Density (3g/cm3)
|
Dimensions in Part
(mesh)
|
Form
|
99.27
|
0.08
|
0.022
|
0.013
|
0.0024
|
0.04
|
1.54
|
-200
|
Powder
|
What is Copper Oxide CuO Powder made of?
There are many methods for industrial copper oxide production
1. Method of copper powder oxidation
Copper ash, copper slag are used as raw materials. They then undergo preliminary oxidation with coal gas. The heat is to evaporate moisture from the materials and remove organic impurities. It is then naturally cooled and pulverized to make crude copper oxide. After adding the crude copper dioxide to the reactor, it is heated and stirred until the ratio of liquid to sulfuric acid doubles. At that point, the pH value of the solution will be 2 or 3. Under heating and stirring, copper oxide can be added to the reactor. After that, it is washed in hot water with no iron or sulfate. Centrifugal separation is followed by drying and oxidation roasting at 350°C for 8 hours. Cooling, crushing to 100 meshes then oxygenation in an oven to produce copper oxide powder.
2. Nitration copper wire, copper powder
The copper wire and copper powder should be dissolved in 6mol/L Natric Acid to prevent the copper from being in excess. To remove iron hydroxide precipitate, raise the pH to 3-4. Mix the solution with 10% (massive) sodium carbonate to bring it to boil. After alkaline salt has precipitated, remove the supernatant and wash well with water. Filter it then dry. The dried basic copper carbonate is heated and decomposed into black copper oxide powder under a small fire with sufficient stirring: CuCO3*Cu(OH)2=2CuO+CO2|+H2O
Once no more carbon dioxide has been produced, decomposition will be complete.
3. Thermal decomposition of copper nitrate
Dilute nitric acids is used to dissolve the electrolytic copper. It's then evaporated on a water bath to dry it, before being heated very slowly in a dehydrator from 90 to 120degC. After the formation of soft basic salt, it must be boiled with water and filtered to dry. Next, heat it to 400 for most of the sodium to evaporate. Finally, crush it to produce oxidation. You can further enhance the process by pulverizing the product again and heating it at 700oC for about an hour. Then, place the product in a desiccator to cool.
4. Conductive water dissolution method
Use conductive water to dissolve high-purity copper Nitrate. Filter the solution, then add extra high-purity NaH3*H2O. After filtering, you can use high purity nitric to neutralize the filtrate. This will precipitate copper hydroxide. Filter the filtrate with conductive waters, adding nitric acids to dissolve the precipitate. After that, spin dry and dry at 200°C. For 3-4 hours burn at 450-550°C to get spectral copper oxide.
5. Method for thermal decomposition copper carbonate
For complete dissolution, place copper wire or powder in a fume hood containing as much 6mol/L Nitric Acid as you can. Filter the solution if it is too opaque. To create black basic salt precipitation, sodium carbonate is dissolved in the copper solution. After the solid has settled completely, drain the excess liquid and filter it. Dry by decantation. Place it in an evaporating tray and heat on a small flame with enough stirring to turn it into copper oxide.
Copper Oxide Uses:
Copper(II) Oxide is an important product of copper mining. It's the base for production of copper salts. Many wood preservers, for example, are made from copper oxide.
Cupric oxide is used to make ceramic glazes in blue, red and green.
Also, it is not recommended to be used in livestock feeds as an dietary supplement. Copper is not absorbed due to its low bioactivity.
It can also be used for welding copper alloys.
An early form of the Edison-Lalande type battery included a copper dioxide electrode. Copper oxide could also be used to make a type of lithium battery.
Copper(II)oxid can also be used in catalysis and superconductivity; ceramics; catalyst carriers; electrode activity material;
glass, colourants of porcelain, polishing agent for optical glasses, oil to desulfurize; propellant rocket fuel speed catalyst.
CuO Powder in Storage:
CuO Powder of Copper Oxide CuO should be kept in a dry, cool, and sealed environment. It should not be exposed to the air.
Shipping and Packing of Copper Oxide CuO powder:
You can pack it in two plastic bags with the inside.
Packaging of copper oxide cuO powder in vacuum packaging, 100g to 500g, or 1kg/bag at 25kg/barrel. Or as you request.
Copper Oxide CuO powder shipping shipping: can be shipped by sea or air as soon as payment receipt is received.
Designerstudiostore advanced material Nano Technology Co. Ltd. (Designerstudiostore) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
Send us an enquiry if you're looking for copper oxide powder of high quality. (brad@ihpa.net)