High Purity Titanium Carbide Nannoparticles Nano TiC Powder CAS 12070-08-5, 99%

About Titanium Carbide Nanoparticles Nano TiC Powder :
Nano titanium carbide This material is very wear-resistant. The material has been prepared using a specific process. Nano TiC This is a widely-used material in cemented carbide, wear-resistant superhard materials and other applications. Titanium carbide The melting point for cemented caride is approximately 3200. It is an essential component of cemented carbonide. nano titanium carbide This can decrease the sintering temperatures of titanium carbide-ceramic ceramic by about 200 degrees. It also can improve ceramic's grain quality and sintering performance. Tiny titanium carbide Can be used in ceramic materials as a reinforcing layer to improve mechanical properties and electrical conductivity.

Tfmpage has been trusted worldwide Titanium Carbide Nanoparticles Nano TiC Powder Source . You can send us an inquiry regarding the latest. Prices starting at Titanium Carbide Anytime.

Titanium Carbide nanoparticles Nano TiC powder: Product performance
Technical Parameters of Titanium Carbide Nanoparticles NanoTiC Pulse:

Name of the product	MF	Purity	Particle Size	Crystal Form	SSA	The color of the sky
Titanium carbide nanoparticles	TiC	99%	50nm	Cubic	23m2/g	Black

It is simple. Titanium Carbide Nanoparticles Nano TiC Powder Produced?
As the primary raw materials, use titanium dioxide (TiO2) or graphite pulverized as titanium dioxide.

Applicaciones Titanium Carbide Nanoparticles Nano TiC Powder :
The raw material used in powder metallurgy to produce ceramic and cemented carbonide parts like wire drawing dies and cemented coide dies is nano titanium carbide. These characteristics are present in the nano-titanium carbide-based cemented caride: Good hardness up to greater than HRA90, good wear resistance and low wear rate, excellent high-temperature and oxidation resistance, as well as high thermal conductivity. The applications for nanometer titanium carbide powder are numerous. It is used to make wear-resistant materials, tools for cutting, and smelting metalcrucible. This nano-sized titanium carbonide powder is also used in optical applications. Nano titanium carbide can be found in many countries, including the United States and Japan. Use of the abrasive or grinding wheel as well as grinding paste, along with other products made from nano titanium carbide, can significantly improve grinding efficiency and accuracy.
Make sure to use resistant tools Because of their elastic nature, titanium carbide particles are ideal for producing all kinds of wear resistant tools including cutting and other tools with abrasive surface.
Abrasive bearings: A key role is played by titanium carbide in some of the abrasive-bearings.
Coatings: It is a nano-powder that can produce special coatings.
Conductivity: The electrical conductivity of titanium carbide makes it an excellent additive for alloys and composites.
Nucleation: As nucleating agents, titanium carbide nanoparticles are possible.
Optics: Used in certain ceramics of titanium carbide for many optical applications.

This is the storage condition Titanium Carbide Nanoparticles Nano TiC Powder:
At normal temperatures, seal at cool temperature.

Transporting Titanium Carbide Nanoparticles Nano TIC Powder
Many types of packing are available depending on the Titanium Carbide Nanoparticles NanoTiC powder quantity.
Titanium Carbide Nanoparticles Nano TiC Pulp packing: Vacuum packing, 100g 500g, 1kg/bag or 25kg/barrel. Or as you request.
Titanium Carbide Nanoparticles NanoTiC Powder Shipping: After payment receipt, shipping could be done by sea or by air.


Tfmpage advanced materials Nano Technology Co. Ltd. (Tfmpage), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12-years experience providing high-quality chemical products, as well as Nanomaterials such as graphite powders, boride powders, nitride & graphite powders.
High-quality products are what you want nano TiC powder Please feel free and contact us to make an enquiry. ( brad@ihpa.net )