High Purity Silicon Aluminum Alloy Si-Al Powder
High-silicon Aluminum Alloy is a binary alloy composed of silicon, aluminum and other elements. It is a material alloy that is used primarily in space technology, aerospace and portable electronics.
About Silicon-Aluminum Alloy SiAl Powder High Silicon Aluminum Alloy Powder is a binary powder composed of silicon-based alloy and aluminum-based alloy and is used as a thermal management material. The high-silicon aluminium alloy material is able to maintain the excellent performance and content of aluminum and silicon. Silicon powder can be prepared with a mature technology at a low price. The material is non-polluting and harmless to humans. What is the purpose of adding silicon to aluminum?
Addition of silicon to aluminum results in a more fluid metal alloy, without the metal breaking down at high temperature. The silicon lowers the melting point of aluminum. As there is no brittleness, the aluminum will not suffer from hot tearing.
The density of aluminum alloy with high silicon content is between 2.42.7g/cm3, while the coefficient thermal expansion (CTE), is between 7-20ppm. The alloy density and thermal coefficient can be significantly reduced by increasing silicon content. High-silicon Aluminum Alloy has good thermal conductivity as well. It also has high specific strength and stiffness. We are the leading Silicon Al Alloy Powder supplier in the world. Please feel free to contact us at any time for the latest Silicon Aluminum Alloy price.
What is Silicon Aluminum Alloy Si Al powder ?
Preparation of silicon and aluminium alloy
(1) no pressure infiltration method
To prepare composite materials, melt the aluminum alloy into the silicon prefabricated part to help with the permeability of carbon steel in the air.
(2) Pressure infiltration method
Applying an external force causes liquid aluminum to penetrate into the preforms of silicon powders. This will promote penetration, wetting and recombination. Normally, the steps consist of preparing the prefabricated reinforcements with silicon particles and then casting the permeable materials.
(3) vacuum hot pressing method
Pressure forming and pressure silting are carried out simultaneously in vacuum conditions.
(4) Method of powder metallurgy
The method for making a mixture of silicon powder, aluminum powder, and binder using injection, dry pressing and other methods, then sintering it in a protected atmosphere to get a dense product;
(5) Rapid solidification method
Increasing the cooling rate of solidification can increase the solidification speed and the degree of solidification. This will improve the microstructure of an alloy.
Application for Silicon Aluminum Alloy Powder Si-Al:
1) High-power integrated chip packaging: aluminum alloy with high silicon content provides efficient heat dissipation.
2) Carrier: This can be used for a local heat sink, allowing the components to be arranged more closely.
3) Optical Frame: Aluminum alloy high-silicon provides low thermal coefficient, high rigidity, and machinability.
4) Heat sinks : the high-silicon aluminum alloy is effective at dissipating heat and providing structural support.
Silicon Aluminum Alloy Si Al powder in automotive parts
This high-silicon aluminum alloy (with a silica content of 20-35%) has excellent tribological characteristics and can be widely used as a lightweight, wear-resistant advanced material for various transportation vehicles, machines, tools, fasteners, and tools.
High-silicon aluminium alloys have a number of advantages including small specific weights, lightness, good thermal conductivity with low thermal expansion coefficients, volume stability, wear resistance and corrosion resistance. They are widely used for cylinder sleeves, brake discs, pistons and rotors in automobile engines.
Storage condition of Silicon Aluminium Alloy Powder Si-Al:
Si-Al powder will not perform well if it is exposed to dampness. Therefore, you should store the silicon aluminum powder in a dry and cool room. It is also important to avoid putting the silicon alloy powder under pressure.
Packing & Shipping Silicon Aluminium Alloy Powder Si-Al Powder :
The packing we use depends on the amount of Si-Al alloy powder.
Silicon Aluminum Alloy Si-Al Powder Packing: Vacuum packing, 100g/bag, 500g/bag, or 1kg/bag. 25kg/barrel.
Once payment has been received, the powder can be shipped by air, sea or express.
Silicon Alumium Alloy Powder Properties
|
Alternative Names
|
AlSi, SiAl, Si:Al, silicon aluminum, Si-Al Powder
|
CAS Number
|
11145-27-0
|
Compound Formula
|
Si-Al
|
Molecular Mass
|
N/A
|
Appearance
|
Gray to Black Powder
|
Melting Point
|
600-760
|
Boiling Point
|
N/A
|
Density
|
2.7 g/cm3
|
Solubility In H2O
|
Insoluble
|
Monoisotopic Mash
|
54.958 g/mol
|
|
|
|
|
Safety & Health Information on Silicon Alumium Alloy Poudre
|
Sign Word
|
N/A
|
Hazard Statements
|
N/A
|
Hazard Codes
|
N/A
|
Risk Codes
|
N/A
|
Safety Statements
|
N/A
|
Transport Information
|
NONH for All Transport Modes
|
Inquiry us