High Purity Pre-alloyed Iron Copper FeCu Powder

About Prealloyed Iron FeCu Powder HTML3_ : HTML3_ A lot of metals found in an application consist of a combination of many different kinds of material. The reason for this is simple. Many pure metals possess the properties needed in certain types of applications. Like copper, it is resistant to saltwater corrosion. Copper is also very thermally and electrically conductive because it's used to make cables and electronics. Magnetic fluctuations, softness and ductility are some of the characteristics that other copper can exhibit.
But, pure metals can be susceptible to disappearance and could cause the loss of application. The copper case is more vulnerable to this metal. It is possible to improve the strength of this metal by using hardening techniques, but another technique can make it easier to add more metals like iron.
Copper has both ductility, and iron is also ductile. Iron is also very conductive and has high tensile strength, as it can be stretched or fractured. Iron can be corrosion-prone because of its oxidization in water and oxygen.
Sometimes adding iron to an iron alloy can produce a positive result. The major benefits of adding iron into the copper alloy are that it increases the tensile and corrosion resistance without altering the original conductivity. Cookingmamacookoff has been a reliable global Iron Copper FeCu Pulp supplier. You can send us an inquiry regarding the latest Iron Copper alloy FCu Powder anytime.

FeCu powder, iron and copper alloy powder

FeCu powder is hard: 102HRB

FeCu powder's tensile strength: 1534Mpa

FeCu powder TDS
Theoretical density of hydrogen is 7.97g/cm3.

Hydrogen loss from FeCu powder: lower than 0.65%

The apparent density of FeCu powder is 0.6 to 0.8g/cm3.

FeCu powder Tap density: 0.9-1.1g.cm3

D50 =10.0-18.3 Particle Size of FeCu Powder

Iron Copper FeCu Powders:
Preparation High surface area, low activity, low temperature of sintering, high density, high hardness, sintered (maximum 102HRB), good sintering stability and bending strength to up to 1534 Mpa. Good flowability.

How Is Copper FeCu Pulch Created?
Fe-Cu pre-alloyed Powders were produced by water atomization, using high purity copper and pure iron as primary raw materials. Excellent batch stability, excellent formability, concentration and stable distribution of particle size, low oxygen, small fluctuation. The products are designed to be applied in the right proportions according to their deployment needs.

Pre-alloyed Iron FeCu Powder
Iron Copper FeCu Powder can be used to make various diamond tools. It replaces the powdered elemental metal, and increases the stability of products.

Iron Copper FeCu Pulp Storage:
FeCu powder's dispersion and usage performance will be affected by dampness. Iron Copper FeCu Powder needs to be kept dry and sealed in vacuum bags. FeCu powder should not be exposed to stress.

Shipping and Packing of Iron Copper FeCu powder:
There are many options for packing depending on the Iron Copper FeCu Powder amount.
Packaging of iron copper FeCu powder, vacuum packed, 100g to 500g or 1 kg/bag at 25kg/barrel. Or as you request.
Iron Copper FeCu powder shipping: can be sent by sea or air as soon as payment receipt is received.