High Purity Zirconium Carbide ZrC Powder CAS 12070-14-3, 99%

Zirconium carbonide (ZrC), a refractory ceramic that has a high hardness, is used commercially to make tooltips. This is done by sintering. Particle Size: 325mesh
Purity: 99%

Zirconium Carbide Pulver:
Zirconium carbide ZrC It is used commercially to cut tooltips. It is often sintered. Zirconium carbide It is hard. Zirconium carbide melting point 3504degC Zirconium carbide Point boiling Temperature is 5100°C The apparent density of the material is 6.70 g/cm3. Mohs hardness ranges from 8-9 Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, containing either nitric acid (or hydrogen peroxide). At high temperatures, it reacts with chlorine to make zirconium trichloride. At 700oC it can burn in the air to create zirconia. You should not mix it with water.

ZrC powder It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC's thermal conductivity is 20.5 W/m*K, and its electrical conductivity (resistivity at 43mO*cm) are both similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC's density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) or WC (15.8g/cm3). ZrC appears to be suitable in reentry, rocket/hyperjet and supersonic aircraft where high density is a critical requirement.

As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free of carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.

To receive the most current information, send us an inquiry Zirconium carbide price Please fill out the form below if you wish to buy Zirconium Carbide ZrC Powder In bulk.

Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:
Zirconium carbonide nanoparticles, CAS 12070-14-3, have high purity, fine particle size, uniform distribution and high specific surface area. High melting point, high strength, corrosion resistant high-temperature material is Nano ZrC. This powder can absorb visible light efficiently, reflect infrared, and store energy.

Technical Parameter: Zirconium Carbide Nanoparticles NanoZrC Pulp:
Name of the product MF Purity Particle Size Crystal Form SSA The color of the sky
Zirconium Carbide Nanoparticles ZrC 99% 20nm Cubic 11m2/g Black

It is simple. Zirconium Carbide ZrC Powder produced?
Zirconium carbonide can be made in many different ways. A carbothermal reaction is what occurs when zirconia or graphite react with each other. This produces powder. By sintering ZrC at temperatures higher than 2000°C, dense ZrC is possible. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.

You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.

Chemical vapor deposition (CVP) is another method of manufacturing. It is possible to heat the zirconium sponge, and also decompose the gas halide.

ZrC cannot be used if it has a lower oxidation rate than 800 degrees Celsius. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrCZrB2 is the preferred composite material. These composite materials are capable of working at temperatures above 1800°C. This situation can be improved by using another material, such as TRISO fuel particles as a barrier.

Applicaciones Zirconium Carbide ZrC Powder:
Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used in the manufacture of zirconium and Zirconium Tetrachloride. Zirconium carbonide can be used in an incandescent filament. The main use of zirconium carbide is as an abrasive. This can be used to make cemented carbide.
Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has high temperatures oxidation resistance and high strength. It also exhibits high thermal conductivity, toughness, and high toughness. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.
Coating material
As refractory coats in nuclear reactors, ZrC is not used. It is less susceptible to radiation damage and has a lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide particles and nuclear fuel. Superheated chemical vapor deposit in a fluidized-bed reactor is the most common method of forming coatings. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.
Concrete tools
These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-structured high-temperature material that has high melting points and excellent strength. This material can be strengthened and resistant to corrosion by using cemented carbide.
Nanostructured parts
Zirconium carbide nanoparticles may be used in the metalurgical, chemical, or aerospace industries. The textile industry can use it to produce nylon, fiber, and carbide thermostatic fabrics. They are also used in composites for metal substrates and ceramics.

Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:
There are many options for packing, which all depend on the quantity of zirconium nanoparticles.
Zirconium carbide nanoparticles packing: You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Shipment of Zirconium Carbide Nanoparticles Once payment has been received, items may be shipped by sea, air or express.


Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global supplier and manufacturer who has over 12-years of experience in producing super-high-quality chemicals.
We can provide high-quality zirconium carbonide powder. Please contact us to send an inquiry. ( brad@ihpa.net )

Zirconium Carbide Properties

Others Names zirconium(IV) carbide, methylidynezirconium, ZrC powder
12070-14-3
Compound Formula ZrC
Molecular Weight 103.23
Appearance Gray Powder
Melting Point 3532
Boiling Point 5100
Density 6.73 g/cm3
Solubility of H2O N/A
Exact 102.912529

Zirconium Carbide Safety & Health Information

Signal word Danger
Hazard Statements H228-H302-H312-H332
Hazard Codes F, Xn
Risk Codes 11-20/21/22
Safety statements 16-27-33-36/37/39
Transport Information UN 3178 4.1/PG2

Inquiry us

NEXT Carbide powder

Our Latest Products

High Purity Nickel Silicide Ni2Si Powder CAS 12059-14-2, 99%

Nickel silicide, which is chemically Ni2Si. Nickel silicide Ni2Si Ni2Si Powder is used in microelectronics integrated circuits, nickel Silicide Films, and silicon-nickel thermocouples. Purity: 99%Particle size 5-10um Nickel Silicide Ni2Si Pulp :…

High Purity Titanium Carbonitride TiCN Powder CAS 12654-86-3, 99%

TiCN (titanium nitrided carbonide) has a significant impact on productivity and surface quality.Particle Size: 325mesh Purity: 99% Titanium Carbonitride TiCN Pulp : Titanium Carbonitride There are many uses for this abrasive other than i…

High Purity Manganese Dioxide MnO2 Powder CAS 1313-13-9, 96.6%

Manganese oxide is either a black amorphous or black rhombic powder. Solubility: It's difficult to dissolve in water or weak acid/weak base and in conc. Purity: 96.6%,72%.Particle size: 1-3um About Manganese Dioxide MnO2: Manganese dioxide Is…

0086-0379-64280201 brad@ihpa.net skype whatsapp