High Purity Manganese Carbide Mn3C Powder CAS 12121-90-3,99.9%

About Manganese Carbide Mn3C Powder:
Manganese carbide It is made from carbon and manganese. Manganese carbide Formula What is Mn3C? Manganese carbide melting point It is approximately 1520degC Manganese carbide The density 6.89g/cm3. Manganese carbide burns quickly in oxygen, and is decomposed in water to make manganese hydrogenxide and methane. It can be easily decomposed by acid, easy reaction with fluorine and chlorine, and at high temperatures, decomposes into manganese, carbon, and methane.
The heat of the formation of manganese carbide is ^fHm (298K)=-(15.06+-12.55)kJ/mol. The result of smelting manganese-silicon or high-carbon ferromangannese in an electric furnace or blast furnace is manganese carbide. This means that the heat absorption by the reaction will be less than for reduction to metallic manganese, or manganese sinicide. It starts With It is cold. The high-carbon ferromanganese is therefore more carbon.

To receive the latest information, send us an inquiry Manganese carbide Prices Please fill out the form below if you wish to buy Manganese Carbide Powder In bulk.

Manganese Carbide Mn3C powder performance:
It is simple. Manganese Carbide Mn3C Powder produced?
The gas-based reduction manganese oxide is a method of making manganese carbide. Once you have mixed manganese dioxide, water and binder together, the dry block can be placed in an atmosphere with H2, CH4, CO, N2, and N2. Then, it is calcined at 1100 1300 to produce manganese carbide products. Here are the specific steps. The mass percent of -325 mesh size refers to 90% analytically purified manganese dioxide, trimanganese troxide and mixed with 0.5% CMC. Finally, pelletization and drying take place. After drying, the sample is placed in an atmosphere of 10% CMC, 30% H2, 10% CO and 50% N2 with a calcination temperature at 1150degC. The calcination process takes 120 minutes. Next, it is placed in an N2 atmosphere. After cooling down to room temperature the obtained manganese carbide product can be converted into manganese dioxide at 95%.

Applicaciones Manganese Carbide Mn3C Powder:
Manganese carbonide Mn3C powder can be used to make hard coatings, target, weld materials, and spray tools. It is also used in the steelmaking industry, aerospace, and many other areas.
The grain refiner of Cermet and Wolfen carbide, manganese carbonide has the ability to significantly enhance the alloy's characteristics.
Manganese troxide is an important raw material in the manufacture of soft magnetic materials of manganese, zinc ferrite and other electronic materials. This is why it is so widely used.
To prepare transformer oils, you can use manganese carbonide. This is a simple process that can be easily replicated on large scales. Manganese Carbide, Mn3C powder storage conditions:
Manganese Carbide, Mn3C Powder, should be maintained in a dry, cool, and sealed environment.

Shipping of Manganese Carbide 3C Powder
You can pack it in two plastic bags with the inside.
Manganese Carbide Mn3C Powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Manganese Carbide Mn3C Powder shipping: Could be sent by sea or air as soon as possible after receipt of payment.

Jatujakguide advanced materials Nano Technology Co. Ltd., (Jatujakguide), is a reliable global supplier of chemical materials and manufacturers with more than 12-years experience in manufacturing super high-quality chemicals.
Send us an enquiry if you're looking for Manganese Carbide Powder of high quality. ( brad@ihpa.net )