Products

  • 0
  • 0

Global Inconel 718 powder market trend 2024-2030 High Purity 3D Printing Nickel Alloy IN718 Powder by Newsdesignerstudiostore

Commodity prices are on track for their biggest rally in more than a century, while fixed-income assets have seen their longest run of outflows as the war in Ukraine adds to inflationary pressures in the global economy emerging from the coronavirus lockdown, according to Bank of America.

"Commodity prices this year are on track to record their biggest gains since 1915." the bank said in its weekly briefing. They cite many factors, such as pandemics, lockdown, civil strife, wars, excessive monetary and fiscal stimulus, and supply chain disruptions, that have led to "historically" high inflation.  

By the same token, it said government bonds were heading for their worst year since 1949, and "negative-yielding bonds will quietly disappear" from the market as central banks embark on a monetary tightening cycle and raise interest rates to tame soaring inflation.  

The prices of many commodities like the Inconel 718 powder are expected to increase in the future.

About 3D Printing Nickel Alloy IN718 Powder:
Nickel Alloy IN718 is heat and corrosion-resistant nickel alloy powder.
 
This kind of precipitation-hardening nickel-chromium alloy is characterized by having good tensile, fatigue, creep and rupture strength at temperatures up to 700 °C (1290 °F).
Nickel Alloy INCONEL alloy 718 is a high-strength, corrosion-resistant nickel-chromium material used at -423° to 1300°F. The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to post-weld cracking, are outstanding.
 
Inconel 718 is a nickel-based superalloy, which is very suitable for applications requiring high strength in the temperature range from low temperatures to 1400°F. Inconel 718 also has excellent tensile strength and impact strength. Inconel 718 has good oxidation and corrosion resistance at temperatures within the useful strength range of the alloy in the atmosphere encountered in the operation of jet engines and gas turbines.
 
Inconel718 alloy is a precipitation hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength, good toughness and corrosion resistance in high and low-temperature environments below 650°C. Its state can be solid solution treatment or precipitation hardening state.

Inconel718 alloy has excellent characteristics and easy processing; it has high tensile strength, fatigue strength, creeps strength and breaking strength at 700℃; high oxidation resistance at 1000℃; stable chemistry at low temperatures performance; Good welding performance. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Nickel Alloy IN718 Powder in bulk

 

Composition of IN718 nickel alloy powder

 

Ni

Cr

Nb

Mo

Ti

Al

Cu

Fe

50.0-55.0

17.0-21.0

4.75-5.25

2.80-3.30

0.65-1.15

0.20-0.80

≤0.30

bal

 

category

Alloy grades and characteristics

Alloy number:

IN718 nickel alloy powder

Particle size:

15-45μm, 15-53μm, 53-120μm, 53-150μm

Morphology:

Spherical or nearly spherical

Appearance:

Grey

Package:

Aluminum bag, Vacuum packing

Application:

3D Printing Nickel Alloy powder

Other applications:

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.



How is 3D Printing Nickel Alloy IN718 Powder produced?
Inconel718 alloy is a difficult-to-process material in the field of mechanical processing. It needs to go through a series of steps.

Warm-up
The surface of the workpiece must be cleaned before and during the healing process to keep the surface clean. If the heating environment contains sulfur, phosphorus, lead or other low melting point metals, Inconel718 alloy will become brittle. Impurities come from marking paint, chalk, lubricating oil, water, fuel, etc. The sulfur content of fuel should below. For example, the impurity content of liquefied gas and natural gas should be less than 0.1%, the sulfur content of city gas should be less than 0.25g/m3, and the sulfur content of petroleum gas should be less than 0.5%.
The heated electric furnace should have a more accurate temperature control ability, the furnace gas must be neutral or weakly alkaline, and the composition of the furnace gas should be prevented from fluctuating in oxidation and reducibility.

Thermal processing
The suitable hot working temperature of Inconel718 alloy is 1120-900℃, and the cooling method can be water quenching or other rapid cooling methods. After hot working, it should be annealed in time to ensure the best performance. The material should be heated to the upper limit of the processing temperature during hot processing. In order to ensure the plasticity during processing, the final processing temperature when the deformation reaches 20% should not be lower than 960°C.

Cold working
Cold working should be carried out after solution treatment. The work hardening rate of Inconel718 is greater than that of austenitic stainless steel, so the processing equipment should be adjusted accordingly, and there should be an intermediate annealing process during the cold working process.

Heat treatment
Different solution treatment and aging treatment processes will result in different material properties. Due to the low diffusion rate of γ" phase, Inconel718 alloy can obtain the best mechanical properties through long-term aging treatment.

Polished
The oxide near the weld of the Inconel718 workpiece is more difficult to remove than stainless steel. It needs to be polished with a fine sanding belt. Before pickling in a mixed acid of nitric acid and hydrofluoric acid, the oxide should be removed with sandpaper or a salt bath is required. deal with.

Machining
The machining of Inconel718 needs to be carried out after solution treatment, and the work hardening of the material should be considered. Unlike austenitic stainless steel, Inconel718 is suitable for low surface cutting speeds.

Welding
The precipitation-hardening type Inconel718 alloy is very suitable for welding and has no tendency to crack after welding. Weldability, ease of processing, and high strength are the major advantages of this material.
Inconel718 is suitable for arc welding, plasma welding, etc. Before welding, the surface of the material should be clean, free of oil, powder, etc., and the bright metal should be polished within 25mm of the weld.
 
Applications of 3D Printing Nickel Alloy IN718 Powder:
Inconel In718 is our original material for 3D printing and additive manufacturing in this nickel alloy.
 
In718 has good tensile strength, fatigue resistance and fracture resistance. It has creep resistance at high temperatures up to 700°C. It is easy to weld and has excellent corrosion resistance. In addition, Inconel In718 can be heat treated.
 
Due to its comprehensive properties, Inconel 718 can be widely used in various applications, such as liquid fuel rockets, rings and casings, various formed sheet metal parts for aircraft and land-based gas turbine engines, cryogenic storage tanks, and fastening Parts and instrument parts.
 
In718 has excellent heat resistance, so it is very suitable for high-temperature applications, including gas turbine and aerospace applications. Other applications include pumps and measuring probes in energy and process technology.

Storage Condition of IN718 Powder:
Damp reunion will affect IN718 powder dispersion performance and using effects, therefore, IN718 powder should be sealed in vacuum packing and stored in cool and dry room, the IN718 powder can not be exposure to air. In addition, the IN718 powder should be avoided under stress.

Packing & Shipping of IN718 Powder:
We have many different kinds of packing which depend on the IN718 powder quantity.
IN718 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
IN718 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com


Nickel Alloy IN718 Powder Properties

Other Names IN718, Inconel-718 powder, Inconel 718 Powder
CAS No. N/A
Compound Formula Ni/Fe/Cr
Molecular Weight N/A
Appearance Gray to black powder
Melting Point 1370-1430 °C
Solubility in water N/A
Density 8.192 g/cm3
Purity N/A
Particle Size 15-45μm, 15-53μm, 53-120μm, 53-150μm
Boling point N/A
Specific Heat N/A
Thermal Conductivity 6.5 W/m·K
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass N/A
Monoisotopic Mass N/A
   
   

Nickel Alloy IN718 Powder Health & Safety Information

Safety Warning Danger
Hazard Statements H317-H351-H372
Flashing point N/A
Hazard Codes Xn
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information  NONH for all modes of transport
WGK Germany N/A


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

New Delhi: India is seeking to increase its purchases of crude oil from Brazil, the country's oil minister said recently after meeting his Brazilian counterpart.  

India is the world's third-largest importer and consumer of crude oil. Brazil currently supplies only a fraction of India's crude oil imports.  

India's state-owned companies Bharat Petroleum Corp and Oil and Natural Gas Corp have invested in oil and gas exploration in Brazil.  

India, which imports about 84% of its crude oil needs, is reducing its import bill by increasing biofuel use, among other things.  

India's state-owned fuel retailers are increasing ethanol storage capacity by 51 percent and the country plans to double the biofuel blend in petrol to 20 percent by 2025.  

India and Brazil are currently cooperating on biofuels and ethanol.

The prices of many commodities like the Inconel 718 powder are expected to increase in the future.

Inquery us

Our Latest Products

Global copper oxide market trend 2023-2027 High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9% by Newsdesignerstudiostore

The China Securities New Energy Vehicle index rose as much as 4.1 percent after a strong rally in lithium-ion shares on the Chinese stock market. Brokerages said lithium enterprises would usher in marginal expectations, and currently, it may be the b…

Global gold nanoparticles market trend 2022-2028 High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5 by Newsdesignerstudiostore

About Colloidal Gold Nano Gold Solution:Colloidal gold benefits:Nanogold is made by using high purity gold as raw material, through a special new processing technology to make gold particle size of 15nm or less, greatly improve the inherent character…

Global calcium stearate market trend 2024-2028 CAS 1592-23-0 Calcium Stearate Powder by Newsdesignerstudiostore

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of t…