A Method for Evaluating the Quality of 3D-Printing Metal Parts

U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the 3D printing metal powder will also increase.

Researchers at NTU Singapore have developed a fast and low-cost imaging method for assessing the quality of 3D-printed metal parts. This method can analyze the structure and material quality of 3D-printed metal parts. 
 
Most 3D-printed metal alloys consist of numerous microscopic crystals that vary in shape, size, and orientation of the atomic lattice. By mapping this information, scientists and engineers can infer the alloy's properties, such as strength and toughness. It's like looking at wood grain. When wood grain is continuous in the same direction, strength and toughness are strongest.
 
The new technology could benefit the aerospace sector - enabling low-cost rapid assessment of turbines, fan blades, and other critical components, which is of great significance to the maintenance and overhaul industry. 
 
Until now, however, analyzing the "microstructure" in 3D-printed metal alloys has been a time-consuming and laborious process, usually achieved using measurements made with scanning electron microscopes, which cost between S $100,000 and S $2 million. 
 
But the new alloy imaging method developed by Assistant Professor Matteo Seita and his team at NTU provides quality analysis in just a few minutes. They used a system of optical cameras, flashlights, and laptops that ran proprietary machine learning software developed by the team at a total cost of about $25,000.
 
The method involves treating the metal surface with chemicals to reveal its microstructure, then holding the sample facing the camera and using a flashlight to illuminate the metal in different directions to take multiple optical images. The software then analyzes the patterns produced by the light reflected off the surfaces of different metal crystals and deduces their orientation. The whole process takes about 15 minutes. The team's findings have been published in NPJ Computational Materials.
 
"By using our low-cost and fast imaging method, we can easily tell the difference between good 3D-printed metal parts and defective parts. Currently, it is impossible to tell the difference unless we evaluate the microstructure of the materials in detail, "explained Seita, an assistant professor at NTU's School of Mechanical and Aerospace Engineering and School of Materials Science and Engineering. 
 
"Even though two 3D-printed metal parts may be produced using the same technology and have the same geometry, they are never the same. In theory, this is similar to how two originally identical wooden objects could have different texture structures." 
 
New imaging methods improve 3D printing certification and quality assessment.  Assistant Professor Seita believes their innovative imaging method could simplify the certification and quality assessment of metal alloy parts produced by 3D printing, also known as additive manufacturing.
 
One of the most common techniques for 3D printing metal parts is to use high-powered lasers to melt metal powders and fuse them layer by layer until a complete product is printed. 
 
However, the microstructure, and thus the quality of the printed metal, depends on many factors, including the speed or strength of the laser, how long the metal cools before the next layer is melted, and even the type and brand of metal powder used. This is why the same design printed by two different machines or production plants may result in parts of different quality. 
 
Instead of using a complex computer program to measure crystal orientation in the light signals collected, the "smart software" developed by Assistant Professor Seita and his team uses a neural network to simulate how the human brain forms associations and processes thoughts. The team then used machine learning to program the software to feed it hundreds of optical images. 
 
Their software eventually learned how to predict the orientation of crystals in metal from an image, depending on how light scatters from the metal's surface. A complete "crystal orientation diagram" is then created, which provides comprehensive information about crystal shape, size, and atomic lattice orientation.
 
3D printing metal powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest 3D printing metal powder price, you can send us your inquiry for a quote. ([email protected])
 
3D printing metal powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality 3D printing metal powder, please feel free to contact us and send an inquiry. ([email protected])

 

The 3D printing metal powder industry has experienced demand expectations driven by the rise and the off-season tired stock driven by the seasonal decline in two rounds of the market. Affected by the COVID-19 epidemic and other factors, inventories of manufacturers continue to accumulate, putting pressure on market sentiment. In addition to off-season factors, the weak trend of 3D printing metal powder also reflects the market's concern about the epidemic and some other related enterprises' financial situation. 

Inquery us

Our Latest Products

High Purity Graphite Powder Flake Graphite C Powder CAS 7782-42-5

Item No.: Tr-C High purity graphite powder flake graphite is natural crystalline graphite, which looks like fish phosphate, belongs to the hexagonal crystal system, and has good high-temperature resistance, electrical conductivity.Purity: 99…

Chromium Chip Chromium Sheet Chromium Flake CAS 7440-47-3

Item No.: Tr-Cr02 Chrome chip hard and brittle steel gray bright metal with hardness like corundum and lower melting than platinumPurity>99.95%Product name: chromium flake…

Succinate monoglycerides

About Succinate monoglycerides:Milky powder, insoluble in cold water, can be dispersed in hot water and hot grease.TRUNNANO is a trusted global Succinate monoglyceride. Feel free to send an inquiry to...…

0086-0379-64280201 brad@ihpa.net skype whatsapp