Applications of Tantalum Carbide TaC Powder

Hasad Foods, the agricultural investment arm of Qatar's sovereign wealth fund, said the government would increase its grain reserves from 250,000 tons to 300,000 tons in the near future, which is enough to feed the population for six months.  

With a lot of deserts, Qatar suffers from water shortages, and Qatar depends on food imports for a long time. Recently, the ongoing tension in Ukraine has caused global food supply tension and rising prices.

In addition to that, the geopolitical situation also affects the supply and prices of many commodities like the TaC powder.

Introduction to Tantalum Carbide TaC Powder
Tantalum carbide is a kind of transition metal carbide. Black or dark brown metallic powder, cubic crystal system, hard. Melting point 3880, boiling point 5500, relative density 13.9, hardness 9 ~ 10. Insoluble in water, slightly soluble in sulfuric acid and hydrofluoric acid, soluble in a mixture of hydrofluoric acid and nitric acid.
Its chemical properties are extremely stable. It has excellent physical and chemical properties, such as high hardness, high melting point, good electrical conductivity, and thermal shock resistance, good chemical corrosion resistance, high oxidation resistance, catalytic performance, etc.
 

Tantalum Carbide TaC Powder Properties
Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance brown to dark brown powder
Melting Point 3850°C
Boiling Point 4780-5470 °C
Density 14.3-14.7g/cm3
Solubility in H2O insoluble
Exact Mass 192.948

 

Tantalum Carbide TaC Powder Cas 12070-06-3

 
Applications of Tantalum Carbide TaC Powder
Tantalum carbide is mainly used for cemented carbide, capacitors, electronic devices, high-temperature components, chemical equipment, and armor piercing shells.

1. Cemented carbide 
Tantalum carbide plays an important role in cemented carbide. It improves the properties of the alloy by improving the fiber structure and phase transformation dynamics, making the alloy have higher strength, phase stability, and processing deformation ability.  Tantalum carbide has a very high melting point (4000) and good thermodynamic stability. Tantalum is particularly effective in promoting nucleation and preventing carbon precipitation from nucleated brittle films formed during late solidification. Its main function is to prevent cemented carbide grain from growing up. In addition, it forms a third dispersion phase with TiC besides WC and Co, which significantly increases the thermal shock resistance, crescent hole wear resistance, and oxidation resistance of cemented carbide, and improves its redness and hardness. 
TaC is added into the alloy in different ways, which will greatly affect the properties of the alloy. On the other surface, the TiC-TaC-WC core phase formed by adding TaC to the alloy as TiC-TaC-WC solid solution has a larger sub-crystal size and smaller microscopic strain than the TiC-TaC-WC core phase, and the former one has better physical and mechanical properties and longer cutting life. 
 
2. Electronics industry 
In recent years, transition metal carbides have attracted much attention due to their chemical stability, high hardness, strong oxidation and corrosion resistance, low resistivity, and many other advantages. Carbide nanomaterials show great potential in metal coatings, tools, machine parts, and composites. Among all the carbide nanomaterials, silver carbide is one of the most popular materials, and also one of the materials with the greatest potential. Tantalum carbide not only inherits many advantages of carbide nanomaterials, but also has its own unique side, such as high hardness (Mohs hardness is 9-10 at room temperature, high melting point (about 3880), high Young's modulus (283-550 GPa), strong conductivity (conductivity is 32.7-117.4μ ω ·cm at 25), high-temperature superconductivity (10.5K), strong resistance to chemical decay and thermal shock, and high catalytic activity for ammonia decomposition and hydrogen separation. 
At present, tantalum carbide powder and whisk tantalum carbide have been prepared by means of carbothermic reduction, thermal plasma, solvothermal, sol-gel, microwave heating, alkali reduction, self-propagating high-temperature synthesis, and high-frequency induction heating sintering.
 
3. Superalloys
Among carbides, the best melting resistance is tantalum carbide (TaC) (melting point 3890) and hafnium carbide (HfC) (melting point 3880), followed by zirconium carbide (ZrC) (melting point 3500). These materials have excellent mechanical properties at high temperatures, far exceeding the best polycrystalline inks. Tantalum carbide, in particular, is the only material that maintains certain mechanical properties over the temperature range of 2900 to 3200. However, the disadvantage of tantalum carbide is that it is very sensitive to thermal shock, and the low thermal conductivity and high thermal expansion coefficient of carbide become the biggest obstacle to the application of aerospace materials. The addition of tantalum carbide to carbon/carbon composites will have higher thermal conductivity and lower thermal expansion conditions, and exert the oxidation resistance and ablative resistance of refractory metals. 
 

Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])

 

New Delhi: India's Oil Ministry recently conveyed its intention to five national oil companies including Indian Oil Corp and Bharat Petroleum Resources LTD to assess the possibility of buying shares in Russian oil projects sold by European and American oil majors.  

Bp announced it would give up its 19.75% stake in Rosneft, the Russian oil company.  ExxonMobil said on March 1 that it would exit about $4 billion in assets and terminate all of its Russian operations, including the Sakhalin-1 project in Russia's far East.  

India's oil ministry has asked the overseas investment arm of India's Oil and Gas Corporation to consider buying ExxonMobil's 30 percent stake in the Sakhalin 1 project in Russia's far East. ExxonMobil is the operator of the project and Indian companies already have a 20 percent stake in the project.

Because of the ever-changing international situation, the supply and prices of international bulk TaC powder are still very uncertain.

Inquiry us

Our Latest Products

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:Chemical composition:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…

0086-0379-64280201 brad@ihpa.net skype whatsapp